Description:
1. Available force 500 kg;
2. Production speed: 350 – 500 items per hour;
3. Machine meet the EU safety requirements;
4. Adjustable dwell time from 0 to100 seconds (calibration – 1 sec.);
5. Cycle counter with reset facility;
6. Heat control adjustable up to 300°C with the alarm system when heat exceeds pre-set value;
7. Automatic lowering of temperature during downtime;
8. Short time of heating elements’ replacement;
9. Heating elements provide even heating of the silicon roller during the cycle;
10. Vertical stroke of the head (with the heater and silicon roller) – 20 -100 mm;
11. Foil advance (after stamping) adjustable from 0 to 250 mm;
12. Foil advance mechanism should provide adjustable tension preventing from irregular pulling;
13. Max. width of the foil - 120 mm;
14. Max. height of the hot-stamped image is 110 mm;
15. Possibility to install several parallel silicone rollers and foils of different width when several areas need to be hot stamped along the length of the object (desirable);
16. Foil advance synchronized with the movements of the roller(s) and of the object what insures correct foil consumption and position in order to achieve a good printing quality;
17. Rotation of the bottle synchronized with the rolling device movement ;
18. Complete decoration over 360° of a cylindrical object with the diameter 100 mm;
19. Max. diameter of the cylindrical items to be hot-stamped – 130 mm;
20. Width of the support shafts should allow placing the bottles with the height of 350 mm. The position of the shafts can be adjusted;
21. Position of the table can be adjusted;
Payment Terms︰ TT
